Shinka Knights OOC

Originally posted by Zekai
Full Name: Zero Zekai

Age: 17

Race: Infecta

Gender: Male

Affiliation: Good

Blood type: O+

Crystal(s): Black Fire (That's the color of the flames, not a tainted one.)

Gear:

Spoiler

MASK: Doesn't have one. He got an implant in his left eye that acts like a scanner which can identify any target on the Shinka Knight's most wanted list and a 2 way communication device. Screens appears in front of him which only he can see.

UPPER TORSO: His crystal is housed in the neck loop on the inside. It's blast, slash, burn, etc. resistant. The armor on the ribs sends the crystal's power to both his gunblade and buckler shield.

GLOVES: As shown in the picture, his left one has blades on his fingers and a buckle shield for protection. His right one is nearly full arm length and fingerless. Just like the upper torso, both are blast, slash, burn, etc. resistant.

LOWER TORSO: The waist armor receives the crystal's power and sends it to the leg armor. Despite not having any air crystals, gives him high mobility. Very stern when on the ground. Cape is just like the other pieces in resistances.

Weapon: EC Divider-996 Strosek Reacted "Black Knight" (It's the gunblade in the picture.)

Appearance:

Spoiler

Here's a bigger picture
I used a smaller one for the picture but this one can give you a better look on the bottom stuff
His eyes and markings are red if you have trouble seeing the color

Personality: When Not in Battle: Kind and friendly to people. When in Battle: Cold hearted and never listens to others.

History: Ever since the Ragnarok's invasion and losing his little sister, he has been on the front lines, killing any Ragnarokians that appear in front of him trying to find the one that killed his sister. (That will be it for now, until I come up with more.)

You could do a better job at explaining your gear. But i guess this is acceptable for now. Application approved.

What do you not understand so I can try to explain?

Sent by Tapatalk

It's not really a lack of understanding so much as it is a you can do better. for example how dose the "gunblade" work and further explaining how your gear works.

The gear really doesn't do much except for what is there. So all I really have to explain is the gunblade, buckler shield and the arm guard that the shield is on.

Sent by Tapatalk

Originally posted by troublexassassin
Approved but i have 2 questions. ! is her name pronounced like sa O nay? and two how if at all dose she use her crystal? granted you don't need a use for it right away if you don't want or can't think of one.

The name is simple to say. Say it like it looks. Soan. That kind of sound. It's better to hear than to type it,, so maybe if you get on Mumble later, I can tell you. As for the crystal, she doesn't have much use for it at the moment. She found it and is simply using it on a necklace. She doesn't really know what it's capable of.

*Crosspost

I just had a brilliant idea (I think)

I was going through my list of characters and I think I know exactly what character I can use for Shinka Knights.

Nemesis.

Aion's assistant AI. She does have an Android form and very little backstory development but she has more than nothing still...
Which means I can adapt her easily.


EDIT:

This is pretty much the only thing I had on Nemesis in my notes.

- Nemesis: Although obviously an AI, Aion believes her to be connected to the conscious of his sister, Tina.
She is capable of existing in a spirit-like form (hologram) outside of the vehicles she is incorporated in alongside Aion.
Her appearance:

Spoiler

Hologram:

Android:

Although I tied her to Aion, I think I could make her independent...
...Unless I can think of someone else I can pair her with on my end...

EDIT 2:
I figured out my characters

Starla and Nemesis

Starla is a scientist type character and would fit the Stella type.
Nemesis is an AI/Android and would fit the Golem type.

so dear tewi, what's the plan for the IC?

NOT FINISHED


Full Name: Jason Stone

Age: 19

Race: Infecta

Gender: Male

Affiliation: Jason Stone is an Infecta, so he fights not only for other Infecta, but for survival, for the ability to live without fear of Ragnarok's hatred and wrath.

Blood type: AB

Crystal(s): Magnetism. He will get another crystal(s) later on.

Gear:

Spoiler

Armor Layers

Spoiler

First layer is a body heat generator/Piezoelectric film that turns body heat and even the smallest movement into electrical energy. This allows the suit's tiny Graphene batteries to charge. (Might add solar cells to shoulders of armor.)

Second layer is an atom-thin sheet of nanofiber used not only for minor protection, but also to prevent the piezoelectric film and nanomuscle from touching.

Third layer is nano-muscle (possibly 750x stronger than human muscle. due to the layer of muscle being thin, it might only give a 2x boost in strength and speed) that works by applying an electric current through the material, causing it to contract. It's highly resistant to blunt-force trauma, which keeps the wearer safe. It's pretty tough, due to it having a very high tensile strength. The reverse piezoelectric muscle has four layers. The core is the nanomuscle itself, the inner layer is a 1 atom thick sheet of electrical insulation, the middle layer is a thin, flexible piezoelectric film, and the outer layer is another 1 atom thick layer of electrical insulation, to prevent the piezoelectric layers from touching each other. Each nano-muscle fiber is coated in these layers. When the nanomuscles contract, it distorts/deforms the piezoelectric film, which generates an electric current. This reduces the amount of power drained from the Graphene batteries, and allows the artificial muscles to help in powering the suit and charging the batteries.

Fourth layer is a hydrostatic gel that can alter its density to allow the user to survive blunt impacts that would kill unarmored people. When an electric current is applied to the hydrostatic gel, it increases its density, and without an electric current, it can allow the user to float in water. Strangely enough this gel can also negate G-forces, protecting the user from the effects of gravity. (Halo inspired :p)

Fifth layer is another atom-thin sheet of nanofiber used not only for minor protection, but also to prevent the hydrostatic gel and aerogel from touching.

Sixth layer is an advanced super-hydrophobic Aerogel that can also withstand electricity. This is mainly used to mask heat signatures and add extra electric/heat protection to the user. Aerogel is a very powerful heat insulator because it prevents convection, conduction, and radiation heat transferal. It is capable of surviving temperatures of 2,192*F (1200*C) before melting.

Seventh layer is a Liquid Armor-treated carbon nanotube layer that instantaneously hardens when struck, preventing blunt-force trauma/damage from concussive blasts, and protects from bullets (not all bullets), and possibly explosions, but can not stop slower moving projectiles and blades. Swords, knives, and slow moving bullets can penetrate the liquid armor. The top-most layer of the suit that contains the liquid armor is a type of nanomaterial that is highly resistant to damage, yet flexible. Think Graphene. Due to Jason's crystal type being Magnetism, this layer had been hardened against EMPs protecting the suit from destroying itself.

Part Functions

Spoiler

Helmet

Spoiler

Targeting System - The targeting system of the armor is helpful when trying to spot enemies when they are hiding. When aiming a gun at a target, the microcomputer within the helmet syncs up with the artificial muscle of the suit and calculates where the bullet from the gun will hit. Once it has a final calculation, it gives the user feedback by adding a targeting reticle on the HUD. The targeting system adjusts in real-time, so when the user moves his aim to another target, the targeting reticle will move as well. This aids in aiming at far away targets, and should the user of the armor choose, they can change what the targeting reticle looks like in the armor's preferences program. Not only that, but when there are multiple enemies in the direction of the visor, the targeting system will add red triangles to each and every enemy.

Visor Settings and Visor - The visor is capable of normal vision, night vision, and thermal vision. The visor is strong enough to deflect bullets, lasers, explosions, and various other sources of damage, thanks to the materials they are made out of.

HUD - The visor's HUD provides the user with feedback and tactical information, such as ammo count, grenade count, the radar, the targeting reticle, the current communication channel, the carbon dioxide scrubber and oxygen supply's condition, the armor and wearer's physical condition, and various other functions. Not only that, if the user syncs up with another person with armor that has a condition sensor, the user's HUD can also show his/her teammates' condition as well. Other things that the HUD can do is record video/audio, set up chatscreens with anyone with compatible technology, show various calculations, play video/audio, set waypoints, and many, many other functions.

Radar - The suit's radar can detect objects and targets 25 meters (82 feet) away, and works by sending out radio wave pulses, then showing what it finds on the HUD. The radar's range can be adjusted in the middle of a fight, and has the ability to register allies via the suit's microcomputer, allowing it to tell the difference between ally and enemy.

Communicator - Located within the helmet is a built-in communicator that works on various frequencies, allowing it to work in most environments, including underground, depending on how far underground the user is. The communicator can use simply audio, or video, depending on what the user chooses, and can even switch communication channels. Not only that, it can even intercept and decrypt some enemy communication channels, allowing the user to listen to the enemy's' COM chatter and plan accordingly.

Rebreather and Carbon Dioxide Scrubber - Located within the helmet is the carbon dioxide scrubber, the breathing apparatus for the rebreather, and two tiny pressurized canisters that supplies the user with oxygen. The carbon dioxide scrubber is a miniature block of material that chemically reacts with carbon dioxide and converts it back into oxygen. Of course, after a certain amount of time, the carbon dioxide scrubber will lose its ability to convert carbon dioxide into oxygen, due to it's ability to chemically react with carbon dioxide being exhausted. After approximately 6 hours of operation, the carbon dioxide scrubber will be used up and will need to be changed out with a new one.

The rebreather and carbon dioxide scrubber works in unison by having the oxygen pass from the oxygen supply canisters and through the rebreather apparatus, and into the user when they breathe. After the user breathes out, the carbon dioxide passes into a CO2 scrubber, which then feeds back into the oxygen supply canisters, keeping the oxygen supply at optimal levels for 6 hours before the supply will be diminished. After that, the oxygen supply can last for 2 extra hours before it is completely exhausted.

The carbon dioxide scrubber can be changed out via a small access slot withing the helmet. When the ejection sequence for the carbon dioxide scrubber is activated, the scrubber's compartment is converted from a pressurized environment to outside pressures, and the oxygen supply is fed through a secondary system, allowing the user to breathe as they change out the scrubber. After the ejection sequence is activated, a small panel on the side of the helmet pops open with the carbon dioxide scrubber attached. After the user pulls the panel out with the scrubber attached, they can then remove the scrubber from the panel's holding slot and place a new scrubber in. Once that is finished, the user simply has to push the panel back into their helmet, and the scrubber compartment is purged and is repressurized to the rest of the suit as the secondary system is disengaged, allowing the scrubber to be used.

There is no worry about foreign contaminants when the scrubber compartment is exposed to the outside environments because of the anti-bacterial surface of the scrubber compartment. Not only that, but when the purging process is engaged, the scrubber is subjected to temperatures of over 10,000*F for just enough time to destroy any foreign contaminants, incinerating everything inside of the compartment without damaging the helmet. After that, the compartment is quickly depressurized into a vacuum, sucking all of the remains out of the compartment and expelling them outside the suit. Once that is done, the compartment is them pressurized to the same levels as the rest of the suit.

Microcomputer - Located within the helmet is the suit's microcomputer. This microcomputer is perhaps the most important and complex part of the entire suit. It is capable of performing countless functions, programs, and routines with only a small amount of power. The microcomputer reads the user's thoughts by using two nodes that stick to the user's head when the helmet is put on, and from there, it helps the user operate more effectively than the average soldier, thanks to the tactical information and aid it provides the user. The microcomputer can even place the armor into an overclocked state where the suit's processes can be increased beyond their normal operating parameters. The only downside to this is that it drains more power from the suit and has a chance of damaging the suit.

Torso

Spoiler

Crystal Compartment - Located within the back of the suit near the spine is the crystal storage unit, where the suit's crystal is located. Power can be drawn from the crystal to power the suit, but due to the piezoelectric materials withing the suit, this function is not needed. Instead, all of the crystal's power can be devoted to using abilities, allowing the crystal to operate more effectively and with less strain.

Micro-thruster Jets - Located on the shoulderblades and mid-back of the armor are four micro-thruster jets that can change their direction. These allow the user of the armor to perform small, quick dashes around the battlefield, giving them the ability to dodge normally unavoidable attacks and explosions. These thruster jets are powerful in short bursts and can even increase the user's jump height and distance, but they are not built for flight.

Graphene Battery - Located within the spine of the armor is the Graphene battery pack. This battery pack can store enough power to power the suit for extended periods of time, and can indefinitely power the suit when not in combat. In combat, the power drain is substantially higher, due to the armor's systems requiring more power for the increased strain, such as more power for the muscles, more power for the thrusters, and so on. As soon as the user stops performing system-intensive activities and moves around, the battery will quickly charge back up.

The battery is made of graphene and is wrapped up in a wound coil, increasing the battery's surface area, allowing it to store more power.

High Density Muscle Fibers - The suit has various clusters of dormant, high density muscle fibers located within different areas of the torso. When the user needs extra strength, these muscle fibers are activated, giving the user an increased burst of strength. Of course, this drains the battery faster than normal, meaning that it can only be used efficiently when used in small bursts.

Arms

Spoiler

High Density Muscle Fibers - The suit has various clusters of dormant, high density muscle fibers located within different areas of the arms. When the user needs extra strength, these muscle fibers are activated, giving the user an increased burst of strength. Of course, this drains the battery faster than normal, meaning that it can only be used efficiently when used in small bursts.

Graphene Batteries and Ultracapacitors - Located within the forearms of the armor are Graphene batteries and tiny ultracapacitors. Unlike the main battery in the armor, these batteries and ultracapacitors are used to power the shock units within the gloves. The batteries can be charged by the main battery, or they can even charge the main battery themselves. These amaller batteries are used to charge the tiny ultracapacitors, which then allow the gloves to emit a quick, yet powerful discharge of electricity when the user strikes a target.

Gloves

Spoiler

Shock Units and Two-Way Circuits - Located within the knuckle caps and palms of the gloves are small, but powerful shock units. Although these shock units can emit a lot of electrical energy in a small amount of time, they are used to deal with an opponent in a non-lethal manner, similar to a taser. If the user keeps a sustained grip on a particular object or target, they can either discharge electricity, or siphon electrical energy for the suit.

Sensor System - Located within the fingers and other parts of the gloves are sensors that can allow the user to feel texture, temperature, and moisture.

Knuckle Caps - The knuckles of the gloves are made up of a strong material that has been nano-engineered to be conductive in one direction. This allows the user to electrically charge their strikes, causing their punches to act like tasers. This is meant for dealing with an opponent or hostile in a non-lethal manner.

Legs

Spoiler

High Density Muscle Fibers - The suit has various clusters of dormant, high density muscle fibers located within different areas of the legs. When the user needs extra strength, these muscle fibers are activated, giving the user an increased burst of strength. Of course, this drains the battery faster than normal, meaning that it can only be used efficiently when used in small bursts.

"Hyper-twitch" Muscle Fibers - Unlike the muscle fibers used for strength, these muscle fibers were built for contraction speed. This allows the user to sprint faster than normal at the cost of power. They can not be activated for long amounts of time, due to the power drain on the battery. It is estimated that the user can only leave the muscle fibers active for 30 seconds before they completely drain the battery.

Boots

Spoiler

Piezoelectric Soles - Located within the soles of the boots are piezoelectric layers that create an electric charge when deformed by the user's footsteps. This aids in charging the Graphene battery. It is especially effective when the user stomps or falls from a great height.

Micro-thruster Jets - Located on the boots of the armor are four micro-thruster jets that can change their direction. These allow the user of the armor to perform small, quick dashes around the battlefield, giving them the ability to dodge normally unavoidable attacks and explosions. These thruster jets are powerful in short bursts and can even increase the user's jump height and distance, and can even allow the user to quickly glide around the battlefield for a short time, but they are not built for flight.

Appearance:

Spoiler

Face/Bodily Appearance:

Spoiler

Armor:

Spoiler

http://fc01.deviantart.net/fs70/f/2012/346/0/e/shinkawa_model_108_augmented_performance_suit_by_ignusdei-d5nsj9c.jpg

Personality: (NOT REQUIRED)

History: Jason joins Ragnarok Army to pay for his education for Nanotech-Engineering.

Contracted the virus.

Ragnarok found out, and while Jason was in his home, he was abducted and placed into a research facility.

Jason fought and broke out of the research facility, taking his armor before he left.

Jason heard about the Infecta ship and boarded it.

Backstory of Shinka Knights (ship gets attacked). Jason helps any way he can.

They land on the planet.

guys!! girls!! there is/will be a blood moon tonight!!

I hope you see it as im at my building's rooftop prepared for it

Originally posted by Kristia
guys!! girls!! there is/will be a blood moon tonight!!

I hope you see it as im at my building's rooftop prepared for it

It's too cloudy where i live to see :<

Originally posted by S121
NOT FINISHED


Full Name: Jason Stone

Age: 19

Race: Infecta

Gender: Male

Affiliation: Jason Stone is an Infecta, so he fights not only for other Infecta, but for survival, for the ability to live without fear of Ragnarok's hatred and wrath.

Blood type: AB

Crystal(s): Magnetism. He will get another crystal(s) later on.

Gear:

Spoiler

Armor Layers

Spoiler

First layer is a body heat generator/Piezoelectric film that turns body heat and even the smallest movement into electrical energy. This allows the suit's tiny Graphene batteries to charge. (Might add solar cells to shoulders of armor.)

Second layer is a thin sheet of nanofiber used not only for minor protection, but also to prevent the piezoelectric film and nanomuscle from touching.

Third layer is nano-muscle (possibly 750x stronger than human muscle. due to the layer of muscle being thin, it might only give a 2x boost in strength and speed) that works by applying an electric current through the material, causing it to contract. It's highly resistant to blunt-force trauma, which keeps the wearer safe. It's pretty tough, due to it having a very high tensile strength.

Spoiler

The reverse piezoelectric muscle will have four layers. The core will be the nanomuscle itself, the inner layer will be a 1 atom thick sheet of electrical insulation, the middle layer will be a thin, flexible piezoelectric film, and the outer layer will be another 1 atom thick layer of electrical insulation, to prevent the piezoelectric layers from touching each other. Each nano-muscle fiber will be coated in these layers. When the nanomuscles contract, it will distort/deform the piezoelectric film, which will generate an electric current. This will reduce the amount of power drained from the Graphene batteries, if not allow the artificial muscles to help in powering the suit and charging the batteries.

Fourth layer is a hydrostatic gel that can alter its density to allow the user to survive blunt impacts that would kill unarmored people. When an electric current is applied to the hydrostatic gel, it increases its density, and without an electric current, it can allow the user to float in water. Strangely enough this gel can also negate G-forces, protecting the user from the effects of gravity. (Halo inspired :p)

Fifth layer is an advanced super-hydrophobic Aerogel that can also withstand electricity. This is mainly used to mask heat signatures and add extra electric/heat protection to the user.

Spoiler

Aerogel is a very powerful heat insulator because it prevents convection, conduction, and radiation heat transferal. It is capable of surviving temperatures of 2,192*F (1200*C) before melting.

Sixth layer is a Liquid Armor-treated carbon nanotube layer that instantaneously hardens when struck, preventing blunt-force trauma/damage from concussive blasts, and protects from bullets (not all bullets), and possibly explosions, but can not stop slower moving projectiles and blades. Swords, knives, and slow moving bullets can penetrate the liquid armor. The top-most layer of the suit that contains the liquid armor is a type of nanomaterial that is highly resistant to damage, yet flexible. Think Graphene.

Appearance: (pics and descriptions are both welcome)

Personality: (NOT REQUIRED)

History: (Something about your life before coming to this new world and or what you've done in he year you've been here)

Holy shit you put a lot of effort into this. I almost feel bad for not giving my own gear more thought.